Dual glass PV modules

YIBAI redefined the high-efficiency module series by integrating 210mm silicon wafers with bifacial, multi-busbar, and half-cut cell technologies. The maximum module efficiency of the S5 bifacial half-cell series is 20%, and the maximum power output of the front side is 670W.

 

High Rating

High Rating

Glass and junction box, with high voltage grade, supports 1500V systems.

Mechanical Load

Mechanical Load

Framed module, front/back side maximum static loading 5400/2400 Pa, makes it suitable for tracker mounts

Smart Module Packaging and Logistics

Smart Module Packaging and Logistics

Smart module packaging solutions are used to achieve high reliability, low-cost transportation and logistics.

Bifacial Energy Yield

Bifacial Energy Yield

Additional power generation from the backside of bifacial modules increases the overall energy yield, which has been verified by customers and third-party testing organizations.

72cells Bifacial PERC Half-Cell PV Module (1)
Multi-busbar Design

Multi-busbar Design

Our nine-busbar design improves current collection capability.

Low Degradation

Low Degradation

Anti-LID, anti-PID, 1st year degradation ≤2%, linear degradation ≤0.45%/year

Standard Module

Standard Module

Our standard module is fully compatible with mainstream inverters and trackers, with no system matching issues.

Gallium-doped Technology

Gallium-doped Technology

Gallium-doped technology overcomes LID degradation and guarantees the long-term power generation of the module.

Lightweight dual glass PV modules, also known as lightweight double glass solar panels, are a type of solar panel that consists of two layers of glass enclosing the photovoltaic cells. These panels are designed to be lightweight and thin, making them well-suited for use in roof-mounted solar power systems and other applications where weight and size are a concern.

One advantage of lightweight dual glass PV modules is that they are more durable and weather-resistant compared to traditional solar panels, which are typically made with a single layer of tempered glass. The additional layer of glass provides added protection against wind, rain, and other environmental factors, which can help to extend the lifespan of the panel. Additionally, the dual glass construction allows for better transmission of sunlight to the solar cells, which can improve the panel’s overall performance and efficiency.

However, it’s important to note that lightweight dual glass PV modules can also be more expensive to manufacture compared to traditional solar panels, and they may not be suitable for all solar power applications. It’s important to carefully consider the pros and cons of lightweight dual glass PV modules before choosing them for a solar power system. 

The new lightweight dual-glass module has adopted a 1.6mm+1.6mm bifacial dual-glass design, which is thinner, lighter, and more efficient.

Dual glass YB-(440-455)-BMA-BG28 Frame 166

72-cell MBB Half-cell Module (4)

Dual glass monofacial YB-(400-415)-BMD-BG 28-Black Frame 182

54-cell MBB Half-cell Module (2)

Dual glass monofacial YB-(405-420)-BMD-BG28 Frame 182

54-cell MBB Half-cell Module (2)

Dual glass Monofacial YB-(445-460)-BMB-BG28 Frame182

60-cell MBB Half-cell Module (1)

FAQs

YBOPTOTECH has 3 series of solar module products: YB-S3,YB-S4,YB-S5. and each series contains bifacial and monofacial module. YB-S3 and 54-cell type YB-S4 is mainly used on industrial, commercial and residential roofs. Both bifacial and monofaical of YB-S5 with 72-cell is mainly for large ground-mount power plants.

 

Bifacial modules are slightly more expensive than monofacial modules, but can generate more power under the right conditions. When the rear side of the module is not blocked, the light received by the rear side of the bifacial module can significantly improve energy yield. In addition, the glass-glass encapsulation structure of the bifacial module has better resistance to environmental erosion by water vapor, salt-air fog, etc. Monofacial modules are more suitable for installations in mountainous regions and distributed generation rooftop applications.

 

YBOPTOTECH took the lead in working with domestic and foreign institutions and customers to carry out empirical testing of bifacial modules for PV power plants, systematically studying the power generation mechanisms of bifacial modules. YBOPTOTECH also leads the industry in bifacial module shipments, surpassing 20 GW+, while providing customers with reference data and technical support.

 

YBOPTOTECH has the largest module production capacity in the industry, with more than 65 GW in its integrated capacity network fully guaranteeing the supply of modules. In addition, the production network facilitates the global distribution of modules with the help of land transportation, railway transportation and sea transportation.

 

YBOPTOTECH launched Life-cycle Standards to guarantee the whole life-cycel quality.YBOPTOTECH’s Integrated capacity layout can guarantee the traceability of each module, and our highly automated production lines feature end-to-end inspection and analysis processes to ensure that each module meets the highest quality standards. We select module materials according to the highest standards, with the requirement that all new materials be subject to extended qualification and reliability tests before being incorporated into our products. Third-party labs like RETC and PVEL have ranked our modules among the highest quality products on the market.

 

Contact

For any inquiries please email