Rack Mounted Stackable Lithium Battery/

Rack Mounted Stackable Lithium LiFePO4 Battery 48V 100AH 4.8KWh

  • Extremely high number of charge/discharge cycles
  • 20 Year lifespan with proper maintenance
  • Built-in smart battery management system
  • Wide operating temperature range
  • Unsurpassed high temperature performance
  • Stable output voltage
  • Little self-discharge
  • Over charging or discharging protection.
  • Over current & short circuit protection.
  • High & low temperature disconnects
  • Charge Voltage: 52.5V
  • Max Charge Current: 50 A
  • Max Discharge Current: 100 A
  • Battery Dimensions: 23 1/4″L x 14 7/8″W x 6 1/8″H
  • Weight: 100 lb
  • Connect in Parallel for Larger Capacity

  • Product Details

48V 100Ah LiFePO4 Deep Cycle Lithium Iron Phosphate Battery Specifications

Electrical Specifications

  • Nominal Voltage: 48V
  • Nominal Capacity(at 0.5C, 77°F): 100Ah
  • Minimum Capacity (at 0.5C, 77°F): 95Ah
  • Expected Cycle Life: >6000 cycles w/1C charge and discharge rate, at 77°F, 80% DOD

Operating Specifications

  • Charge Method: Smart charger, constant current, constant voltage
  • Operating Voltage: 48V
  • Capacity: 100Ah
  • Energy: 5kWh
  • Charge Voltage Range (Max 52.5V): 52.0 -52.5V
  • Continuous Charge Current: 50A
  • Continuous Discharge Current: 100A
  • Over Voltage Shutdown: 52.5 +/-0.2V
  • Discharge Cut-off Voltage: 42V =/- 0.5V
  • Self Discharge (stored at 50% SOC): < 3%/month

Temperature Performance

  • Charge Temperature: 32° F to 140° F
  • Discharge Temperature: -4° F to 140° F
  • Storage Temperature: -4° F to 140° F
  • BMS High Temperature Cut-off: 149°F
  • BMS Low Temperature Cut-off: 32°F

Physical Specifications

  • Battery Dimensions: 23 1/4″L x 14 7/8″W x 6 1/8″H
  • Weight: 100 lb
  • Group Size: 15
  • Battery post size: 5/16″

Over Charge Protection

  • Over charge detection voltage: 3.9 +/- 0.05V
  • Over charge detection delay time: 0.96 – 1.4s
  • Over charge release voltage: 3.80 +/-0.05V
  • Maximum charge voltage: 3.65 +/-0.05V

Over Discharge Protection

  • Over discharge detection voltage: 2.0V +/- 0.05V
  • Over discharge detection delay time: 115-173ms
  • Over discharge release voltage: 2.3V +/- 0.10V
  • Over Current Protection Over current detection delay time: 9 +/- 2ms
  • Over current release condition: Cut load
  • Polarity Reverse Protection: Yes
    Short Circuit Protection: Yes

BMS Safety Protection

  • Each cell is fused and if for some unlikely situation a cell fails, this design will isolate the cell stopping any other damage and allows the battery to function safely
  • Convenient removable carry handle
  • Lightweight
  • Short circuit protected
  • Physical damage to battery case will not cause fire
  • Excessive thermal exposure will not cause a fire
  • Able to withstand over-charge/over-discharge without damage to the battery
  • Sophisticated Battery Management System (BMS)

Warranty

10 Year Manufacturer Defect

Prev:

Next:

Leave a Reply

Leave a message